Comparison with traditional lamps

Compared with high frequency induction lamp

Comparison program Low frequency induction lamp High frequency induction lamp Basic characteristics External core structure,easy for heat dissipation, given the flexibility to select tube size and shape, with a single magnetic ring and two pairs of magnetic configuration, the inductor volume. core built-in structure is not conducive to heat dissipation, only the bubble-shaped structure with a ball, single-core, a small amount of inductance. wide power range, 15W——400W Less choice of power range(different factories has different choice) Avaliable for different power types according to customers'demand(50W、60W、70W、100W、250W, etc). Avaliable for different power types according to customers'demand Low temperature of tube surface High temperature of bulb-tube surface Good low temperature start-up performance Poor low temperature start-up performance. Differences in electrical properties of matching Specific IC chip self-activated core-level exchange of the way MHZ output signal, with the temperature changes the frequency and lamp power will change. And regulation-specific IC chip technology Hard to realize the dimmable technology. Difference between photometry Round, rectangular structure, the use of special reflectors makes it be used in a variety of applications. Bulb-type structure, type of light emitting points, a general lighting device matching with reflective, reflective design is easier. Compared with the same power of HID lamps, it has higher luminous efficiency. Compared with the same power of low frequency induction lamps, it has poor luminous efficiency

Compared with Fluorescent

Comparison program LVD CFL LFL Warranty 2 years no no Life Compact: 60,000 hrs Separate: 100,000 hrs 8,000~10,000 hrs Electrode exerts electro and wears out so as not adapt to circuit, life reduced. 8,000~12,000 hrs Electrode exerts electro and wears out so as not adapt to circuit, life reduced. Energy saving Excellent Good, low power consumption Bad, high power consumption Light efficiency 150 Plm/W 85 Plm/W 69 Plm/W Tube design Neat design, lumen output is shown on the working surface mostly. 3U or spin structure is more complicated, 20-40% of lumen output is not shown on working surface. Neat design, lumen output is shown on the working surface mostly. Depreciation(%) Very slow, 5%(2000hrs) Very fast, 30%(2000hrs) Very fast, 25%(2000hrs) Flicker No Yes Yes Glare No Yes Yes Environmental freiendliness No wasted tube, no mercury pollution. With wasted tube and mercury pollution. With wasted tube and mercury pollution.

Compared with other induction lamp

Comparison program LVD induction lamp Other induction Lamp (built-in type) Other induction lamp(separate type) Technology level Leading core electronic magnetic technology, research reserve is the leading worldwide. Different technology Follow the technology Warranty 2 years < 2 years 2 years Light efficiency and color temperature 150 Plm/W(Color temperature: sunlight) Ard.120 Plm/W (partial blue) < 150 Plm/W(partial white blue) Electronic ballast technology and heat problem IC chip is applied to the ballast so largely reduced the interference of each electric components, assure steady performance, temperature <70 degree. Traditional components inside, serious interferences, unstable performance, high temperature, easy to crack, not suitable for large wattage. Traditional components inside, serious interferences, unstable. Production scale Commercialized, industrialized, standardized and produced in large scale. Far from being commercialized, industrialized, standardized and produced in large scale. Far from being industrialized, standardized and produced in large scale. Frequency 230 KHz 2,650 KHz 250 KHz EMC Electromagnetic compatibility Meet the international standard FCC Potential EMC interference problem. NA Wattage range 300W ~ 15W no limited to smaller or bigger wattage in skills and technology of heat control. 165W, 85W, 55W and 23W, not complete range, lots of technological obstacles to solved. 200W ~ 70W limited range, lots of technological obstacles. Certificate CE, UL, FCC, CCC and other international standards etc. Not complete Not complete

Compared with HPS

Comparison program LVD MHL HPS HPM Warranty 2 years no no no Life span Compact: 60,000 hrs Seperated: 100,000 hrs 6,000~20,000hrs High temperature due to the electrode work to change their physical state, it makes ballast not match with the situation, it becomes more and more serious, so that shorten the life span. 24,000 hrs the same reason with MHL 3,000~6,000 hrs the same reason with MHL Energy-saving performance Super Poor, high power consumption Poor, high power consumption Very Poor, very high power consumption Effective efficiency 150 Plm/W 110~140 Plm/W 90 Plm/W 43 Plm/W Lumen deperciation(%) Very low, 5%(2000hrs) A little big, 40%(2000hrs) Big, 30%(2000hrs） Very big, 45%(2000hrs) Lamp temperature Very low, <80℃, save the air conditioner consumption High, >300 ℃, make the air conditioner's power consumption high High, >350 ℃, make the air conditioner's power consumption high Very high, >300 ℃, make the air conditioner's power consumption high CRI >80, super 65~90, good 60, poor 45, very poor Instant hot restrike Instant start not not not Fliker no yes yes yes Glare no yes yes yes Eco-friendly No waste lamp recycling, and mercury pollution Problem with waste lamp recycling Problem with waste lamp recycling Problem with waste lamp recycling and mercury pollution

Compared with LED

Comparison program LVD LED Feature Define Low Voltage Discharge Liner light. Good for large wattage application. Lighting Emit Diode Spot light. Usually for signboard, decoration applications. Technology Research and develop in 2000, sell in 2003,in a position of new leading light source. Standardized product can fully meet the market need, suitable for large scale production. The first red light LED was developed in 1968.Since then, its been 40 years. The first white light LED was in 1996.Invest risk high for technology update too fast. Not suitable for functional lighting project. The whole growing process is slow. Market potential LVD can replace most of conventional light sources in functional lighting fields, so its potential market is huge. LED has developed for many years, but limited to traffic signal, vehicle rear light, LCD panel back lighting, display in lower wattage because of the low light efficiency, low power factor, scarcity of accommodated fittings. Economy With the development of large scale production, LVD cost will be lowered to the same level of traditional lights or even lower, then it will be widely used. High cost, difficult to be widely used in some fields, limited in certain market. Energy saving LVD efficacy is as 30% as higher than LED, with lower depreciation. Lower efficacy, lower power factor, high depreciation and heat output, not as saving as LVD. Semi-conductor technology consumes more energy during production. Application Industrial, commercial, street, tunnel, bridge, garden, agriculture, Ad. … Traffic signal, vehicle rear lights, cell phone display screen etc. Limited in functional lighting projects. Reference LVD has been widely used in various lighting projects. It is proved that LVD has big market potential, industrialization speed with scale effect. LED is drawn back by its technological problems. Probably another 5-10 years to go before it is industrialized and scaled. Technical data Power: 15~300W Efficacy: >80lm/w CRI: >80Ra Color temperature: 2100K~6500K full range Depreciation: 5%（2000hrs） Life:>100,000hrs Heat output: very low Light fitting: easy to accommodate Liner light source: no glare, no flicker, good visual effect. Each 0.5~1W, more than 100 needed for large wattage. Efficacy: <60lm/w(white light) Color Rendering Index: >80Ra Color temperature：narrow range(white light LED) Light attenuation: >50%(2000 hours) Service life: <50,000hours Heat value: very high, needs cooling device. Fixture: because of more than100 led in the same large Circuit Board, it is difficult to design the right reflector. Light source: Dazzling glare and flicker, serious light pollution.

Lvd Shop LTC Glodok & Electric Lighting Induction Division.
Address: Jl. Hayam wuruk LINDETEVES TRADE CENTRE, Jakarta-Indonesia
Lantai 2 Blok B2 No.6 Tepl/Fax : 021 6285 444 , Flexi : 021 28855781
GSM: +62813 2219 3818, +62817 687 0882
Email: marketing-lighting@hotmail.com
Page loading time Up To You: --:-- Sec